Using CLI commands

This example shows how to set shared, system-specific, and sensitive values in your development system, then set all the values in your production system using a combination of the shared configuration, config.php, and Magento CLI commands.

These configuration settings can be shared between the development and production systems:

VAT Number and Store Name from Stores > Settings > Configuration > General > General

These configuration settings are either system-specific or sensitive, as indicated:

  • Send Emails To (sensitive) from Stores > Settings > Configuration > General > Contacts
  • Default Email Domain (system-specific) from Stores > Settings > Configuration > Customers > Customer Configuration > Create New Account Options

You can use the same procedure to configure any settings in the following references:

Before you begin

Before you begin, set up file system permissions and ownership as discussed in Prerequisite for your development, build, and production systems.

Assumptions

This topic provides an example of modifying the production system configuration. You can choose different configuration options if you wish.

For the purposes of this example, we assume the following:

  • You use Git source control
  • The development system is available in a Git remote repository named mconfig
  • Your Git working branch is named m2.2_deploy

Step 1: Set the configuration in the development system

To set the default locale and weight units in your development system:

  1. Log in to the Magento Admin.
  2. Click Stores > Settings > Configuration > General > General.
  3. If you have more than one website available, use the Store View list in the upper left corner to switch to a different website as the following figure shows.

    Switch websites

  4. In the right pane, expand Store Information.
  5. If necessary, clear the Use Default check box next to the VAT Number and Store Name fields.
  6. Enter a number in the field (for example, 12345).
  7. In the Store Name field, enter a value (like My Store).
  8. Click Save Config.
  9. In the left navigation, under General, click Contacts.
  10. In the right pane, expand Email Options.
  11. If necessary, clear the Use Default check box next to the Send Emails To field.
  12. Enter an e-mail address in the field.
  13. Click Save Config.
  14. Use the Store View list to select the Default Config as the following figure shows.

    Switch to the default config

  15. In the left pane, click Customers > Customer Configuration.
  16. In the right pane, expand Create New Account Options.
  17. If necessary, clear the Use system value check box next to the Default Email Domain field.
  18. Enter a domain name in the field.
  19. Click Save Config.
  20. If prompted, flush the cache.

Step 2: Update the configuration

Now that you’ve changed the configuration in the Magento Admin, write the shared configuration to a file as discussed in this section.

  1. Log in to your development system as, or switch to, the Magento file system owner.
  2. Enter the following commands in the order shown:

    cd <Magento root dir>
    php bin/magento app:config:dump
    

    For example, if Magento is installed in /var/www/html/magento2, enter:

    cd /var/www/html/magento2
    php bin/magento app:config:dump
    
  3. If you use Git, enter the following command to confirm that app/etc/config.php was updated:

    git status
    

    You should see output similar to the following:

    # On branch m2.2_deploy
    # Changed but not updated:
    #   (use "git add <file>..." to update what will be committed)
    #   (use "git checkout -- <file>..." to discard changes in working directory)
    #
    #       modified:   app/etc/config.php
    #

    Do not submit changes to the generated, pub/media, or pub/static directories to source control. You’ll generate those files on your build system. The production system likely has code, themes, and so on that aren’t ready to use on production.

  4. Check in your changes to app/etc/config.php only to source control.

    The Git command follows:

    git add app/etc/config.php && git commit -m "Updated shared configuration" && git push mconfig m2.2_deploy
    

Note that even though app/etc/env.php (the system-specific configuration) was updated, don’t check it in to source control. You’ll create the same configuration settings on your production system later in this procedure.

Step 3: Update your build system and generate files

Now that you’ve committed your changes to the shared configuration to source control, you can pull those changes in your build system, compile code, and generate static files. The last step is to pull those changes to your production system.

To update your build system:

  1. Log in to your build system as, or switch to, the Magento file system owner.
  2. Change to the build system’s Magento root directory.
  3. Pull the changes to app/etc/config.php from source control.

    The Git command follows:

    git pull mconfig m2.2_deploy
    
  4. Compile code:

    php bin/magento setup:di:compile
    
  5. After code has been compiled, generate static view files:

    php bin/magento setup:static-content:deploy -f
    
  6. Check the changes into source control.

    The Git command follows:

    git add -A && git commit -m "Updated files on build system" && git push mconfig m2.2_deploy
    

Step 4: Update the production system

The last step in the process is to update your production system. You must do it in two parts:

Update the sensitive and system-specific settings

To set the sensitive and system-specific settings using environment variables, you must know the following:

  • Each setting’s scope

    If you followed the instructions in Step 1, the scope for Send Emails To is website and the scope for Default Email Domain is global (that is, the Default Config scope).

    You must know the website’s code to set the Send Emails To configuration value. See Use environment variables to override configuration settings for more information on finding it.

  • Each setting’s configuration path

    The configuration paths used in this example follow:

    Setting name Configuration path
    Send Emails To contact/email/recipient_email
    Default Email Domain customer/create_account/email_domain

    You can find all sensitive and system-specific configuration paths in Sensitive and system-specific configuration paths reference.

Set the variables using CLI commands

This section discusses how to the following commands to set system-specific and sensitive configuration settings:

  • magento config:set for system-specific settings
  • magento config:sensitive:set for sensitive settings

To set the system-specific setting Default Email Domain, which is in the default scope, the command to use is:

php bin/magento config:set customer/create_account/email_domain <email domain>

You don’t need to use the scope in the command because it’s the default scope.

To set values for Send Emails To, however, you must know the scope type (website) and the scope code (which is likely different on every site).

An example follows:

php bin/magento config:sensitive:set contact/email/recipient_email --scope=website --scope-code=<website code> <email address>

Update the shared settings

This section discusses how to pull all the changes you made on your development and build systems, which updates the shared configuration settings (Store Name and VAT Number).

To update the production system:

  1. Log in to your production system as, or switch to, the Magento file system owner.
  2. Start maintenance mode:

    cd <Magento root dir>
    php bin/magento maintenance:enable
    

    For additional options, such as the ability to set an IP address whitelist, see magento maintenance:enable.

  3. If you use Magento Commerce, stop queue workers. TBD
  4. Pull code from source control.

    The Git command follows:

    git pull mconfig m2.2_deploy
    
  5. Update the configuration:

    php bin/magento app:config:import
    
  6. Clean the cache:

    php bin/magento cache:clean
    
  7. End maintenance mode:

    php bin/magento maintenance:disable
    

Verify configuration settings in the Magento Admin

This section discusses how you can verify the configuration settings in your production system Admin.

To verify the configuration settings:

  1. Log in to your production system’s Magento Admin.
  2. Click Stores > Settings > Configuration > General > General.
  3. Use the Store View list in the upper left corner to switch to a different website.

    The shared configuration options you set in the development system are displayed similar to the following.

    Check settings in the production system

    The Store Name field is editable in the website scope but if you switch to the Default Config scope, it is not editable. This is the result of how you set the options in the development system.

    The value of VAT Number is not editable in website scope.

  4. If you haven’t already done so, switch to Default Config scope.
  5. In the left navigation, under General, click Contacts.

    The Send Emails To field is not editable, as the following figure shows. This is a sensitive setting.

    Check settings in the production system

  6. In the left pane, click Customers > Customer Configuration.
  7. In the right pane, expand Create New Account Options.

    The value of the Default Email Domain field is displayed as follows. This is a system-specific setting.

    Check settings in the production system